Ductless Mini-Split Installation in Tampa, FL
Zoned cooling for garages, additions, sunrooms and older Tampa homes without ductwork — single and multi-zone systems.
Ductless mini-splits are the fastest-growing install we do in Tampa Bay. They solve the classic Florida problems: the garage that hits 110°F, the enclosed lanai nobody uses after April, the 1950s bungalow in Seminole Heights with no duct chase, and the primary bedroom that never matches the rest of the house.
A single-zone install is usually a half-day job with a three-inch wall penetration — no ductwork, no attic work, no major drywall. Multi-zone systems let one outdoor unit run up to five indoor heads, each with its own temperature control and its own utility bill impact.
What’s included
- Room-by-room sizing for each zone
- Wall-mounted, floor console or ceiling cassette indoor units
- Line set covers color-matched to the exterior wall
- Dedicated electrical circuit where required
- Condensate management for Tampa humidity
- Wi-Fi control setup on your phone
- Permit and inspection handling
Ductless Mini-Split Installation: FAQ
Are mini-splits good for Florida humidity?
Yes — modern inverter mini-splits run long, low-speed cycles that remove more moisture than oversized central systems. Many models also have a dedicated dry mode for Tampa’s shoulder seasons.
How much does a mini-split cost installed in Tampa?
Single-zone systems typically run $3,200–$4,800 installed. Multi-zone setups range $6,500–$12,000 depending on the number of heads and line set runs.
Can a mini-split heat too?
Every system we install is a heat pump, so it heats as well. For Tampa’s handful of 40°F nights, a mini-split handles heating far cheaper than strip heat.
Other installation services
Central AC Installation
Full central air conditioning systems sized for Tampa’s heat and humidity — condenser, air handler, refrigerant lines and duct hookup.
From$5,900AC Replacement
Swap an aging or failed unit for a modern high-efficiency system — old equipment hauled away, most replacements done in a single day.
From$5,400Heat Pump Installation
High-efficiency heat pumps that cool all summer and heat on Tampa’s rare cold snaps — the system that qualifies for the biggest federal credits.
From$6,400New Construction HVAC
Design-build HVAC for new homes, additions and major remodels — duct design, equipment selection and multi-stage installs with your builder.
From$7,900Smart Thermostat Installation
Ecobee, Nest and Honeywell smart thermostats installed and configured correctly — C-wire solutions, humidity control and scheduling setup.
From$275Packaged Unit Installation
All-in-one rooftop and ground-level packaged systems for slab homes, mobile homes and light commercial spaces across Tampa Bay.
From$6,800Get a straight answer on your installation
Call and describe your home and current system — you will get a realistic price range and the soonest available install window, not a sales script.